In this case, the print head is clogged, and it is necessary to clean the print head with power ink flush to see if the print head can be restored, if the test page is still not good after flushing, you will need to replace the print head If all is ok, the problem may be with the print head, it get burned. If your print head can move but cannot print any colors, first you need to check if you have pulled the ink into the dampers and drew ink out from the waste tube. In addition, if the picture is not made in CMYK, but in RGB format, it will also affect the color, and the resolution of the image will also affect the printing effect.įurthermore, the effect of vector image and bitmap image is also different. The CMYK (cyan, magenta, yellow, black) are used to print on flatbed uv printer and other inkjet printer, so there will be deviations in printing. What we see on the screen is a mixture of three colors RGB (red, green, blue). If there is an error between the printed image and the one displayed on the screen, it may be related to the color format. At this time, it is necessary to print out the test page of the print head to check and troubleshoot. If the color deviates, it may be that the nozzles on print head is partially clogged, resulting in some color deviations. If there is no solidified ink at the bottom of the print head, you need to check whether there is something on the printing platform that causes the transfer film to protrude and scratch If the DTF prints are scratched by print head or stained with other pigments after printing, you need to check whether there is solidified ink under the print head, clean it will solve the issue for your l1800 dtf printer
BLACK LIGHT INK PAD SOFTWARE
If it still doesn't work, the software needs to be reinstalled for your direct to transfer printer. The length should not exceed 1000mm, otherwise the machine may malfunctionįirst check whether the dongle is plugged in and in good contact, switch a usb port and try to solve the problem. For example, for an A4 DTF printer, the width of the canvas should be set to 210mm (8.27 inches), and the length to 297mm (11.69 inches)įor A3 DTF roll printers, the width of the canvas should be set to 297mm (11.69 inches), and the length should not exceed 1000mm, otherwise the machine may malfunctionįor A3+ DTF roll printers, the width of the canvas should be set to 330mm (13 inches) When the image you printed lacks white ink or the white ink is quite thin, you should first check the white ink tube, If you find that the ink has flowed back to the ink bottle on your dtf transfer printer, you should draw 5ml ink from the ink damper to make the ink fill the tube out, and then do the power ink flush in the software, the last step is to print the test page to check the print head status.ĭTF printing needs to mirror the image, otherwise, the printed image will be reversed after being transferred onto the fabric by the heat press machine, so we need to mirror it and then print a layer of white on the back of the image to make it more vibrantĪfter installing the software, we need to adjust the size of the canvas to match your dtf heat transfer printer.
We just need to reset it using software, and then the tshirt printer machine can be restored to use. It is a reminder that the waste ink pad is ending of life and needs to be replaced.
When the DTF L1800 printer’s ink light and paper loading light flash alternately, your will unable to print your image.
0 kommentar(er)
